|
Do Many People Build Their Own Phase Converters?
Information about people building
their own phase converters and the advantages and disadvantages.
Should people use the phase converter designs found on the Internet?
How
Long Does It Take To Build a Phase Converter?
Read about why building phase converters can be very time
consuming and costly.
Can Building Your Own Phase Converter Damage Equipment?
Building your own phase
converter can be risky. Why should three-phase equipment be
operated by a true, 3-phase converter?
Why is it Recommended that a Phase
Converter be Purchased from a Reputable Manufacturer Instead of Building Your Own?
Many manufacturers offer wholesale pricing, and they have
experienced professional engineers who can design the correct phase
converter for your application requirements.
Building Your Own Phase Converter does not
Guarantee that it is a True, 3-Phase Converter.
Information on true, 3- phase converters and why they
operate equipment efficiently and safely.
How do I Know What Size and Kind of Phase
Converter will Run My Job Applications?
Information on how to pick the
right phase converter for your three-phase power requirements. Why
the correct size is so important when selecting a 3-phase converter.
Is it Easy to Find Quality Materials When Building a Phase
Converter?
There is no guarantee that the materials purchased to build a
phase converter are reasonably priced or are of dependable quality.
|
Can Building Your
Own Phase Converter Damage Equipment?
 Most
of our electrical equipment and machinery in today's marketplaces are
now manufactured for three-phase power supplies. However, most of the
power input into our homes and businesses are wired for single-phase
power sources. This can create a problem when operating equipment that
requires three-phase electricity. As a result, so many home
operators and businesses are trying to build their own phase converters
assuming that it is the more economical solution when obtaining
three-phase power. It has been proven over and over again that
building your own
phase converter usually damages equipment
due to the unbalanced
electrical circuitry.
Since industrial machinery is now
being manufactured with three-phase technology and because of the need
for three-phase power for our job applications, many people are trying to build their own phase
converters with the idea that they have a substantial knowledge of how a
true, three-phase converter is manufactured. Studies have shown
quite a different scenario.
Building your own
phase converter can cause damage to equipment,
but even worse, be very dangerous to the operator.
When
operating three-phase equipment, a three-phase rotary phase
converter is
most often the three-phase power solution.
Rotary three-phase
converters are designed and engineered to
produce a balanced three-phase power source from a single-phase
electrical
 current. In a three-phase system, three circuits are used to
carry three alternating currents of the same frequency, which reach
their instantaneous peak values at three different times. Each circuit
in a three-phase power load carries electrical current operating in
three different phases resulting in a constant flow of electricity,
which produces a more balance power load. This prevents power
surges that causes motors in equipment to burnout or become damaged.
With a true, rotary phase converter, valuable equipment runs safely and
efficiently.
When running equipment on self-built phase converters, there is the
probability that the phase converter is not a true, three-phase rotary
converter type. Most of the time, the plans and designs
that you get from the
Internet or from
other operators are
limited in their
phase
converter wiring diagrams and
dimensional drawing designs. When
following most of the Do-It-Yourself phase converter directions, you end up
building a static
phase
converter that only produces
three-phase power during the startup of your equipment. As
mentioned above, when
three-phase equipment operates on unbalanced single-phase power, this
can result in power surges damaging equipment and causing your machinery
to breakdown. Because there are few |
repair depots that have the same industrial parts that the
"Do-It-Yourself-Builder" used, it is very difficult to get equipment up
and running again. Also, there isnt any warranty coverage on phase
converters that are self-built, which can be costly.
If the decision has been made to
build your own phase converter, be sure you contact a reputable manufacturer
such as Ace Phase Converters before starting this timely and expensive
endeavor. Ace
Phase Converters
can
answer all your questions and can help
 you with an economical solution to your three-phase
power requirements. Its best to let the professionals handle the
issues and designs of complicated three-phase
power solutions. Using a reputable manufacturer will be more cost effective in the long
run because they can get quality materials at more
reasonable prices due to the large quantities of phase converters that
they design and manufacture. Large manufacturers of phase converters
stand behind their products with long-term warranties and can sell
three-phase converters at wholesale prices, which will not only save you money,
but will provide you with a true, three-phase converter that produces
balanced three-phase power. Your equipment will operate for many years
when you use the correct phase converters manufactured by educated and professional
engineers who eliminate the chances that your equipment will suffer
irreparable damage because of unbalanced power sources.
 Please read all the articles on the Building Your Own Phase Converter
Website. Also, there are many additional articles below that will
add to your knowledge of phase converters. Because of the huge
risk of
building your own phase converter damaging your equipment, it is highly recommended that you
contact an experience manufacturer such as Ace
Phase Converters .
They will be glad to assist you with any questions
you
may have. Don't you owe it to yourself to get some professional
advise before building a phase converter that will damage equipment
and cost you far more than you would pay by purchasing a phase converter
from a professional wholesale manufacturer.
After talking to a professional designer of phase converters, you may
have a broader appreciation of how building a phase converter
can damage equipment. It is very frustrating watching the
"Do-It-Yourselfers" who have the very best of intentions trying to find
repair depots or industrial merchandisers who may carry parts. Ninety-nine percent of the time, maintenance
representatives don't want to take the risk repairing damaged
equipment or self-built phase converters. They
usually don't have the
quality phase converter materials needed, and fixing a piece of machinery or electrical equipment that
someone else designed can
 be very risky. Repair specialists
can't be expected to understand the inexperienced phase converter
designs that people use to build their own phase converters. Even
though you have the very best of intentions, make things easy and call a
professional phase converter manufacturer! |
Building Your Own Phase Converter
is not always the most economical
solution for three-phase power. There is no guarantee that
most "do-it-yourself"
phase converter
wiring diagrams and
phase converters dimensional drawing
designs are that of a true,
3-phase converter.
Ace Phase Converter
- A Leading Manufacturer of 3-Phase Converters
Ace Phase Converters is a leading
manufacturer of quality 3-phase converters, and they offer long-term
warranties on their products.
Additional
3-Phase Converter Resources
The
U.S. Phase Converter Standards Organization
The Three-Phase Resource Site
Phase
Converter Information
Top Rated U.S. Manufacturers
ACE Phase
Converters
TEMCo Phase Converters
Isn't it Cheaper
to Build Your Own Phase Converter than it is to Buy One?
Many people try to save money by
"doing-it-yourself." However, when it comes to electrical
three-phase converters, it's best to trust professionals who have many
years of experience.
What
Happens When the Phase Converter You Built Needs Repair?
Finding repair depots can be difficult, and when building a phase
converter yourself, repair specialists don't always know how the
converter was built or have the same kinds of parts and materials that
were originally used.
Internet Directory:
3-Phase
Power
Ace
Phase Converters
Specializes in
Fast
Freight Delivery
within just a few days of placing your order.
No destination is too remote, and Ace has worldwide
freight capabilities.
|